 |
| |
Specialised Repair/Maintenance Tools
Timesert Thread Repair System
 |
The Timesert thread repair system is the best available. Timeserts are a thin wall, solid bushing with the internal and external thread synchronised. This allows for minimal stock removal from parent threads with all the advantages of high integral strength, sealing against liquids and gases. The flange on the insert negates the possibility of the insert winding through with the bolt/stud. The bottom few threads of the Timesert are not fully formed until a broaching tool is driven through, which exerts side wall pressure, making the insert difficult to remove under normal winding in and out of bolts, etc. They are used in many applications at an O.E.M. level to strengthen threads in new products and of course repair of damaged threads. A thick wall Bigsert derivative is also available.
 |
Typical drain or sump plug application |
Available in Inch, Metric, Sparkplug, Sump plug, Pipe, head bolt and major OEM configurations.
Suitable for the most intense operations as used on brake systems in Aircraft applications and F1 racing. www.timesert.com
back to top
Walton Tap Extractors
Walton Tools make very handy tap extensions and a wonderful broken tap extractor – which enables removal of fractured taps in most situations. Available in a huge variety of sizes / flute types. [Just magic!] We stock most of these products. http://www.waltontools.com/ Designed to easily remove broken taps, these tools utilize high tensile fingers which fit into the original tap flutes allowing operator to remove broken tap. Available in various sizes and flute number, i.e. 3 flute tap, 4 flute tap. They can save many hours in these applications.
Tap extensions and piloted spindle tappers round out a very handy and unique tool range
back to top
Flex-Hone
Surface Finishing Tools are predominantly used for plateau finishing or de-glazing engine bores. Other uses include rust removal, blending in, de-burring. These tools provide those benefits without any real stock removal, are self compensating for wear, extremely easy to use and are virtually unbreakable. Typically we stock these sizes in 180, 240 and even 400Grit in the larger sizes. Material is Silicon Carbide. Sizes up to 8”are generally available in 180G, whilst larger units are usually ex USA.
| BC 5.5mm |
(.217") |
BC 3/4" |
(19 mm) |
BC 2 1/8" |
(54 mm) |
GBD style are heavy duty |
(76mm) |
| BC 6.4mm |
(.250") |
BC 20mm |
(.787") |
BC 2 1/4" |
(57 mm) |
GBD 3 1/4" |
(83mm) |
|
| BC 7mm |
(.276") |
BC 7/8" |
(22 mm) |
BC 2 3/8" |
(60 mm) |
GBD 3 1/2" |
(89mm) |
|
| BC 8mm |
(.315") |
BC 15/16" |
(23.8 mm) |
BC 2 1/2" |
(64 mm) |
GBD 3 3/4" |
(95mm) |
|
| BC 9mm |
(.354") |
BC 1" |
(25.4 mm) |
BC 2 5/8" |
(67 mm) |
GBD 4" |
(101mm) |
|
| BC 9.5mm |
(.375") |
BC 1 1/8" |
(29 mm) |
BC 2 3/4" |
(70 mm) |
GBD 4 1/4" |
(108mm) |
|
| BC 10mm |
(.394") |
BC 1 1/4" |
(31.8 mm) |
BC 2 7/8" |
(73 mm) |
GBD 4 1/2" |
(114 mm) |
|
| BC 11mm |
(.433") |
BC 1 3/8" |
(35 mm) |
BC 3" |
(76 mm) |
GBD 5" |
(127 mm) |
|
| BC 12mm |
(.472") |
BC 1 1/2" |
(38 mm) |
GB 3 1/4" |
(83 mm) |
GBD 5 1/2" |
(140 mm) |
|
| BC 1/2" |
(12.7 mm) |
BC 1 5/8" |
(41 mm) |
GB 3 1/2" |
(89 mm) |
GBD 6" |
(152mm) |
|
| BC 14mm |
(.552") |
BC 1 3/4" |
(45 mm) |
GB 3 3/4" |
(95 mm) |
GBD 6 1/2" |
(165mm) |
|
| BC 5/8" |
(16 mm) |
BC 1 7/8" |
(48 mm) |
GB 4 1/8" |
(105 mm) |
GBD 7" |
(178 mm) |
|
| BC 18mm |
(.709") |
BC 2" |
(51 mm) |
GB 4 5/8" |
(118 mm) |
GBD 7 1/2" |
(190mm) |
|
|
|
|
|
|
|
GBD 8" |
(203mm) |
|
When ordering, advise bore size - these are 10% oversize to give sufficient sidewall pressure.
Sole importers of a range of Lubricant transfer pumps in pogo configuration through our Associated company Metalock of Australia [Aust] P/L
back to top
|
|
